






The Ice Bumper Car 5BC-07 behaves differently from anything on a gripped floor. Reduced friction means the car keeps moving after the driver turns, so a bump becomes a slide and a slide becomes a drift. Riders spend the session learning how much steering is enough — and how much is too much.
Each car seats two, runs a 500W drive at 48V and carries up to 150kg. At 180*180*115cm it is compact enough for an indoor floor, and the FRP and steel body takes the knocks of a busy session with CE certification behind it.
A grid car is pushed and stops almost where it is hit. An ice car is nudged and keeps travelling. That single difference changes how a session feels: less head-on impact, more chasing, more near-misses and more laughing when someone spins out.
Maintenance also splits. A grid car needs a clean, sound floor grid and pickup system. An ice-style car needs a well-kept surface and healthy drives — there is no grid to inspect, no contact strips to clean, and no electrical work in the floor.
For a park deciding between the two, this is often the deciding factor: operators who already run a conventional floor often add an ice arena as a second, distinct ride rather than a replacement. Our ground grid bumper car sits at the other end of that comparison.
Two seats change who rides. A parent takes a child, a teenager takes a friend, and two adults who would never queue alone will happily take a car together. Sessions fill faster and the ride reads as a social attraction rather than a solo one.
Load capacity is 150kg across the pair, which covers most adult-adult combinations comfortably. Suitable age starts at 3 years with supervision, so families can ride together on the same car.
The surface is the ride. Keep it clean, dry and free of grit, and check it before every session the way you would check a grid for debris.
No refrigeration is involved, so there is no ice plant, no compressor and no overnight freezing cycle. Running costs stay close to those of a normal indoor attraction.
Family entertainment centers, indoor parks and covered commercial venues get the most from this ride. The drifting motion photographs well, which matters more than operators expect: guests post the spin-out clips, and the arena gets seen before people arrive.
Venues without a permanent floor can run the same concept with no surface works at all by using a floorless battery bumper car set. Where a younger crowd dominates the floor, the single-seat kids ice bumper car runs the gentler version of the same idea.
|
Product name |
Ice Bumper Car |
|
Model Number |
YTCN-5BC-07 |
|
Capacity |
2P |
|
Cabin |
1 piece |
|
Size |
180*180*115cm |
|
Power |
500W, 48V |
|
Loading Weight |
150kg |
|
Packaging |
Export package |
|
Material |
FRP+steel |
|
Certificate |
CE Certificate |
|
Color |
Customized Color |
|
Suitable age |
Over 3 years old |
|
Installation |
professional installation pictures and videos or arrange staff install |
|
MOQ |
1 Set |
Lower friction. The car slides after you steer instead of stopping, so sessions feel more playful and produce far more spin-outs.
No. It uses a specially prepared smooth surface with no refrigeration, so running costs stay low and there is no ice plant to maintain.
No. Adults often enjoy the drifting challenge more than kids do, and the two seats suit parent-and-child or friend pairs.
There is no floor grid. Upkeep focuses on the surface condition and the car drives, plus routine checks of bumpers and belts.
CE certification, padded bumpers, operator-controlled power and staff supervision on the floor, with age guidance from 3 years and an adult riding with younger children.
There is no charging cycle to interrupt, so the practical limit is staffing and visitor demand rather than the ride, and sessions can run back to back all day.
Yes. Colors are customized and the FRP bodywork accepts graphics, so the fleet can carry your venue identity, a seasonal theme or a sponsor's artwork.
01 Production
02 Shipping
03 Installation
04 Feedback
05 Application Scenario

We source premium to guarantee durability and longevity, Skilled craftsmen and advanced robotics work in harmony to precision-cut, weld, and assemble components, before shipping will do the testing. From raw materials to production to testing, we fully control the quality.

Use the professional export package, the fiberglass use the three layer(Bubble film + non-woven fabric + stretch film), it will better protect the equipment. The workers have rich loading experience, reasonable use of container space to save freight for customers.

We have the professional installation team. The engineer has rich experience with installation, can guide the installation, formulate a reasonable installation plan and conduct routine maintenance training. Let customers save worry, trouble and money, and complete the project installation work faster and better.

Our team has cooperated with many government and private park projects. Our high-quality products and excellent services have won praise from customers. This is the feedback from one of the our government projects.

The equipment can be used in various scenarios, such as outdoor parks, shopping malls, indoors, etc. We can plan according to your site and make a 3D design drawing of the playground for you.






Error: Contact form not found.