Ice Kids Bumper Car

Ice Kids Bumper Car
Ice Kids Bumper Car
Ice Kids Bumper Car
Ice Kids Bumper Car
Ice Kids Bumper Car
Ice Kids Bumper Car
Ice Kids Bumper Car

Technical parameters

A Small Car for Small Drivers

The Ice Kids Bumper Car 5BC-08 is scaled for the youngest drivers. One child per car, a footprint of 1.35*1.35*1m, and a 450W drive that produces a gentle slide rather than a shove. Children climb in, take the wheel and discover they can steer something on their own.

It suits riders over 3 years old, carries up to 150kg, and comes with CE certification. The body is FRP over steel, so it survives knocks from the outside as well as the inside. Colors are customized, which is how most operators match a kids' zone to the rest of their branding.

How an Ice-Style Floor Behaves

On a smooth prepared surface, the car glides and drifts instead of gripping and shoving. Momentum carries it, so bumps feel soft and rounded rather than sharp. That is the whole appeal for a young rider: enough movement to feel fast, not enough to frighten.

No refrigeration is required. The surface is prepared and maintained, not frozen, so the running cost stays close to that of any indoor floor attraction and there is no ice plant to service. Staff keep the surface clean and dry, and the cars are checked before each session.

Operators often ask about session length. Ten to twelve minutes suits this age group: long enough to find the controls and try a few turns, short enough that nobody gets tired or cold. Post the session time at the gate so parents know when to expect their child back. Staff can then clear the floor between groups and run a quick visual check on each car.

Where a two-seat version is wanted so a parent can ride along, the larger ice surface bumper car uses the same principle on a bigger chassis.

Inflatable Barriers and Safety Zones

An inflatable boundary gives the arena a soft edge. A child who drifts wide meets air rather than a hard rail, and the barrier also defines the floor visually so parents know exactly where the ride begins.

The layout that works is simple. One gate for entry, one for exit, staff standing inside the boundary, and a viewing side where parents can watch and film without leaning over the cars. Leave a walkway behind the inflatable wall so staff can reach a stopped car without stepping into traffic.

  • Inflatable ring sized to your available floor
  • Entry gate and a separate exit gate
  • Staff position inside the barrier, near the gate
  • Clear parent viewing side with room to stand back

Kids' zones often pair the car with a slower tracked ride; our playful bus ride is a common companion for the same age group.

Technical Specifications

Product name

Ice kIds Bumper Car

Model Number

YTCN-5BC-08

Capacity

 1P

Cabin

 1 piece

Size

1.35*1.35*1m

Power

450W

Loading Weight

150kg

Packaging

Export package

Material

FRP+steel

Certificate

 CE Certificate

Color

 Customized Color

Suitable age

 Over 3 years old

Installation

 professional installation pictures and videos or arrange staff install

MOQ

 1 Set

Frequently Asked Questions

What age is this car designed for?

Roughly 3 to 8 years old. The speed is gentle and the steering is light, so it works as a child's first driving experience with an adult nearby.

Does it need a real ice rink?

No. It runs on a specially prepared smooth surface with no refrigeration. Setup is straightforward and there is no ice plant to maintain.

How is this different from a standard bumper car?

It runs on a low-friction surface, so the car slides and drifts instead of pushing. The motion is calmer and better suited to small children.

How many children ride at once?

One child per car, which is deliberate: every rider gets to feel like the driver, and that is the part young visitors talk about afterwards.

Is staff supervision required?

Yes, as with any bumper car attraction. Staff supervise the floor, manage the entry and exit gates, control session length and keep an eye on the youngest riders.

Can we brand the cars for our venue?

Yes. Colors are customized and character details can be added, which helps a kids' zone look like part of the wider park.

How does the fleet fit into a family entertainment center?

The small footprint means a kids' arena can sit in a corner rather than taking a main hall. Sites adding a second drawing card often look at battery bumper cars for events for older siblings.

Project process

  • 01 Production

  • 02 Shipping

  • 03 Installation

  • 04 Feedback

  • 05 Application Scenario

Production
01 Production

We source premium to guarantee durability and longevity, Skilled craftsmen and advanced robotics work in harmony to precision-cut, weld, and assemble components, before shipping will do the testing. From raw materials to production to testing, we fully control the quality.

Shipping
02 Shipping

Use the professional export package, the fiberglass use the three layer(Bubble film + non-woven fabric + stretch film), it will better protect the equipment. The workers have rich loading experience, reasonable use of container space to save freight for customers.

Installation
03 Installation

We have the professional installation team. The engineer has rich experience with installation, can guide the installation, formulate a reasonable installation plan and conduct routine maintenance training. Let customers save worry, trouble and money, and complete the project installation work faster and better.

Feedback
04 Feedback

Our team has cooperated with many government and private park projects. Our high-quality products and excellent services have won praise from customers. This is the feedback from one of the our government projects.

Application Scenario
05 Application Scenario

The equipment can be used in various scenarios, such as outdoor parks, shopping malls, indoors, etc. We can plan according to your site and make a 3D design drawing of the playground for you.

Customer Reviews

Customer Feedback
Customer Feedback 2

Company Strength

Yueton Company Strength
Yueton Company Strength 2
Yueton Company Strength 3
Yueton Factory

Contact Us

Error: Contact form not found.

Home WhatsApp Mail Inquiry