
Splash pads and water play structures. These are specified as a play area rather than a single product, because the water treatment and recirculation system is part of the design.
Water source and treatment: a recirculating system needs a plant room and a filtration design; a once-through splash pad needs a drain and a supply. Surface: the play surface has to be slip-resistant and drained, which is often a bigger cost than the features. Supervision: a splash pad with no standing water can usually run without lifeguards, which changes the operating model completely.
A water playground is bought as equipment and run as a facility. Filtration, treatment and water-quality testing are daily work in season, and the splash area needs a plant room or service zone that the layout has to allow for. That is why the design questions on this range start with drainage rather than with the play features.
A splash pad is a summer asset in most markets and a year-round one in a few. The equipment is the same; what changes is whether the site can justify the plant and the staffing for the months it will be open.
Water boats · Outdoor playgrounds · All non-powered equipment
All 21 models are quoted at customized size. What is fixed is 116 mm galvanized steel pipe and engineering plastic, with a minimum order of one set.
Because a water playground is set out around the pool or splash pad it stands in. The 116 mm pipe frame is standard; the footprint is drawn to your site.
Fall, drainage and water supply are settled at survey rather than from the catalogue. [待确认:单套水寨循环水量与补水要求]
Every one of the twenty-one lists a CE certificate in its specification table, and the export team works to EN 13814 or GB 8408 by market.
One set, on all twenty-one models, so a park can open a single splash structure and add to it in a later phase.
Tell us the ride type, site size and target opening date. We reply within one working day.