
The widest group in the indoor range and the fastest to open. An inflatable needs a blower, a flat floor and ceiling clearance for the slide — no foundation, no three-phase supply, no operator certification of the kind a powered ride needs.
Floor area and ceiling: a slide needs its length plus a run-off, and the ceiling must clear the top of the slide with a person standing on it. Throughput: a single-lane slide moves roughly one child every 20–30 seconds; multi-lane units are the answer when the queue is the constraint. Blower power: standard units run on a single-phase blower, which is why inflatables work where rides cannot.
An inflatable is only as good as its blower and its anchors. The blower runs continuously, so it is the first part to service; the anchors decide whether the unit stays put in wind. Both are reasons why an inflatable is specified with a weather policy rather than with a size alone.
Indoor soft playgrounds · Trampoline parks · Indoor playground videos · All indoor equipment
Size is listed as customized on every model in this group, so the fixed figures are in the shell: 0.55 mm PVC, with 1000D base cloth from Plato on 21 of the 45 units.
Twenty-one are built from 1000D base cloth in 0.55 mm PVC from Plato; the other twenty-four use 0.55 mm PVC. The artwork differs more than the structure does.
Yes. Every model here lists its size as customized, so a floor plan and the ceiling height are what we quote from rather than a stock size.
One set. All 45 models carry a minimum order of one set, so a venue can place a single unit before building out a zone.
Standard units leave in about seven days. A customized inflatable runs 30 to 50 days depending on design approval and the factory schedule.
Tell us the ride type, site size and target opening date. We reply within one working day.