Rent is charged by the square metre, not the cubic metre. A space-efficient soft play layout stacks play levels on a smaller base rather than spreading climbing, sliding and ball play across a wide floor. The Indoor Soft Playground 5IPG-02 is drawn for malls and family entertainment centres where the floor plate is fixed, keeping the busy features in a compact tower and leaving the rest of the floor for seating, prams and the till.
Walk any mall unit and you find wasted shapes: the strip behind a structural column, the wedge beside the service corridor, the dead area under a mezzanine. Because the pieces are separate units, a compact tower can be set into those shapes and the rest of the floor stays clear. On a tight upper level, operators sometimes put a small ride such as a classic 4 loop roller coaster in the low-ceiling bay and keep the soft play where the height is.
Four answers decide whether a stacked layout fits:
Send them with a measured plan and the drawing shows where a stacked layout fits.
Height changes supervision, so the plan has to separate ages by level rather than by room. Younger children stay at ground level with the ball pool and soft blocks; older ones go up the climbing route. A single entry point at the base keeps staff able to see who heads up. Some operators give each session its own core attraction instead — a mad mouse roller coaster pulling teenagers to one end of the building while the soft play holds the under-eights.
Stacked play puts load through the frame and brings children close to the ceiling, so both parts of the build matter.
Units carry CE certification and the floor is rated for children over 3 years old. Colour and logo are customized, so a mall can match the tower to its signage.
A compact footprint makes the queue the constraint, not the equipment. Work out how many children a session admits, how long they stay and where the exit lane runs, then set the layout so arriving and leaving families do not cross.
|
Plastic parts |
LLDPE imported from Korea |
|
Iron parts |
galvanized steel pipes. |
|
Model Number |
YTCN-5IPG-02 |
|
Mat |
EVA.2cm thick. |
|
Packaging |
Export package |
|
Certificate |
CE Certificate |
|
Color |
Customized Color |
|
Suitable age |
Over 3 years old |
|
Installation |
professional installation pictures and videos |
|
Logo |
Customized Logo Availabled |
|
MOQ |
1 Set |
There is no single figure, because the drawing is custom. A compact stacked tower suits units where the floor plate is limited but the headroom is genuine. Send measured dimensions with the ceiling height, column positions and access route, and the layout is sized to what the space actually allows rather than to a catalogue footprint.
Not if the design keeps sightlines open. The tower concentrates play rather than spreading it, but each level needs enough clear height to crawl and stand. Children move through the levels quickly, which is why compact soft play zones often feel busier than wide, flat ones with the same capacity.
Plastic parts are LLDPE imported from Korea and the frame is galvanized steel pipe, with EVA matting at 2cm thick covering the play surface. The playground is CE certified and rated for children over 3 years old, with customized colour and logo available.
Parts ship in export packaging and are typically lifted by the service lift or through a loading bay, so check the crate dimensions against your route before delivery. Installation runs from professional installation pictures and videos, or we can discuss arranging support on site. Minimum order is one set.
Sometimes. Because units are separate, an extension can be planned in a later phase, but adding height later means the frame and fixings have to be re-checked against the original drawing. Tell us at the design stage if expansion is likely, and the first build can be specified to make that possible.
Usually the opposite during peak hours, because activity is concentrated in one tower and sightlines change quickly. Plan supervision around the entry point and the upper levels. Timed sessions help, since a predictable turnover lets you match staff numbers to the crowd instead of reacting to it.
01 Production
02 Shipping
03 Installation
04 Feedback
05 Application Scenario
We source premium to guarantee durability and longevity, Skilled craftsmen and advanced robotics work in harmony to precision-cut, weld, and assemble components, before shipping will do the testing. From raw materials to production to testing, we fully control the quality.
Use the professional export package, the fiberglass use the three layer(Bubble film + non-woven fabric + stretch film), it will better protect the equipment. The workers have rich loading experience, reasonable use of container space to save freight for customers.
We have the professional installation team. The engineer has rich experience with installation, can guide the installation, formulate a reasonable installation plan and conduct routine maintenance training. Let customers save worry, trouble and money, and complete the project installation work faster and better.
Our team has cooperated with many government and private park projects. Our high-quality products and excellent services have won praise from customers. This is the feedback from one of the our government projects.
The equipment can be used in various scenarios, such as outdoor parks, shopping malls, indoors, etc. We can plan according to your site and make a 3D design drawing of the playground for you.
Error: Contact form not found.
