Trailer Disco Tagada

Trailer Disco Tagada Configuration for a Touring Circuit

A Tagada is the ride that turns a crowd into a show. Riders sit on a circular bench, the platform bounces and tilts, and everyone else stands and watches. The trailer version puts that machine on the road, so the same ride works a town fair on Friday and a festival field on Monday.

The 5PTR-02 carries 24P and covers 10m. For a travelling operator those two numbers set the booking sheet: a pitch that takes a 10m footprint, and a per-cycle load that keeps the queue moving.

Setup and Power for a Trailer-Mounted Tagada on Tour

The build order on site is short and worth repeating the same way every time. Position the trailer on firm, level ground. Unfold and lock the platform. Check the bench fixings and the restraint bars. Connect power. Run the ride empty for a cycle before the public is let near it.

The drive is rated at 30KW, which is the largest single ask on most event power plans. Confirm it with the organiser in writing at the booking stage, and be clear about whether it is three-phase and whether the supply is dedicated to the ride. A Tagada that shares a generator with food stalls will trip at the wrong moment.

Customized colour and logo are available, so the ride can carry the operator's branding for a one-off booking without a repaint between stops.

Crowd Flow Around a Bouncing Tagada Ride on the Road

Half the value of a Tagada is the audience it collects. The ride is loud, the music is part of the product, and the motion gives people at the edge something to watch and film. The layout should therefore keep a viewing side open.

Queue on the opposite side from the viewing rail. The exit goes to a third direction so loaded and unloaded guests never share a route. Where the ride is one of several attractions on a loop, operators often move a bright sightseeing bus on the same circuit or add a versatile sightseeing bus to lift the family audience while the Tagada takes the teenage crowd.

At night the ride is the landmark. Position it where the lights can be seen from the field entrance, because a visible bounce sells tickets.

Maintenance Windows Between Touring Stops for a Trailer Tagada

Touring eats time that would otherwise go into scheduled maintenance, so checks have to fit around the moves. A short inspection after every set-up is more useful than a long one that never happens: bench springs, restraint bars, platform locking pins, hydraulic lines and the drive.

Keep a small parts box on the vehicle. Springs, pins and lighting are the items that fail on the road, and holding two of each prevents a lost weekend. The build is FRP with steel and a CE certificate is issued with the unit.

Technical Specifications