






Most parks sort their rides into two piles: gentle for the small children, hard for the teenagers. The Rock Ride lives in the gap between them. It rocks riders through a high sweeping arc with a pendulum feel, which reads as a genuine thrill from the walkway yet stays open to a broad age range. That is the piece you park where the two zones meet, because it gives a family one ride they can all agree on. A portable flying car pairs well next to it.
The motion is a swing, not a drop, so the fear and the fun both come from the arc rather than from free fall. Riders feel the ride carry them high, hesitate for a beat, then sweep back through the low point. Because the format is familiar, first-timers know what is coming after watching one cycle from the fence.
Capacity is 24P, so boarding is a group exercise. Seats fill in one sweep, restraints are checked in a second sweep, and the operator releases the whole arc together. Keep the barriers tight to the platform and brief attendants on the release sequence so loading never stalls.
This is a moderate footprint ride, which is much of the reason to buy it. It delivers swing-style thrill without a long track or a tall tower, so it slides into an existing gap between two attractions rather than forcing a rebuild. Walk the site with the arc in mind: leave clearance on the side where riders swing highest, and keep a service approach at the rear of the frame.
Parents decide at the gate, not at the ticket desk. Give them a clear view of the arc from the queue so they can judge whether their child is ready for it. Because the intensity is approachable rather than extreme, most of them say yes, and that single decision is what fills the second half of your ride. Post the height and age rules at the gate.
Panels are FRP on a steel structure and the drive is 35KW. The unit ships as an export package with a CE certificate. Installation comes with professional pictures and videos, or we arrange staff to install on site. Custom colours and a custom logo are both available, and the minimum order is 1 set. If your site also runs a slow loop route, the dudu kids trackless train covers the calm end of that circuit.
Daily operation is where a swing ride proves itself. There is no track to inspect and no train to dispatch, so the morning check is short: restraints, gate latches, frame bolts and the control panel. Keep spare restraint hardware on site and log the pre-open check, because inspectors ask for that record.
|
Product name |
Rock Ride |
|
Model Number |
YTCN-5FC-09 |
|
Capacity |
24P |
|
Power |
35KW |
|
Packaging |
Export package |
|
Material |
FRP+steel |
|
Certificate |
CE Certificate |
|
Color |
Customized Color |
|
Installation |
professional installation pictures and videos or arrange staff install |
|
Logo |
Customized Logo Availabled |
|
MOQ |
1 Set |
It gives a real sweeping thrill, but the movement is a rhythmic swing rather than a sudden drop, so the scare builds and releases instead of landing all at once. Thrill-seekers come off it happy and adventurous families come off it willing to ride again.
It suits a wide band of visitors, roughly from older children up to adults, and it works as a shared family experience because the swing is approachable. Parks use it as the bridge between a kids zone and a serious thrill zone, so both groups have a reason to walk the same path.
Capacity is 24P. Twenty-four seats means a full group boards and releases together, which keeps a walking crowd moving on a peak day. Loading discipline matters more than raw capacity, so brief attendants on the sweep sequence and keep the platform edges fenced.
The drive is 35KW and the structure is FRP over steel. Confirm your incoming supply and panel capacity with an electrician before ordering, because the connection detail is decided by your site rather than by the ride. A CE certificate is issued with each unit.
Between zones. Put it where a family leaving the gentle rides can see the swing before they reach the hard thrill rides. It also works on a mid-sized plot that cannot host a coaster, since the footprint is moderate and the ride needs no long straight run.
Yes. Custom colours are available and a custom logo can be applied, so the ride can carry a park identity or a sponsor mark. Share your artwork and preferred colour reference at order stage. Minimum order is 1 set, and installation instructions or our own installation crew are both options.
01 Production
02 Shipping
03 Installation
04 Feedback
05 Application Scenario

We source premium to guarantee durability and longevity, Skilled craftsmen and advanced robotics work in harmony to precision-cut, weld, and assemble components, before shipping will do the testing. From raw materials to production to testing, we fully control the quality.

Use the professional export package, the fiberglass use the three layer(Bubble film + non-woven fabric + stretch film), it will better protect the equipment. The workers have rich loading experience, reasonable use of container space to save freight for customers.

We have the professional installation team. The engineer has rich experience with installation, can guide the installation, formulate a reasonable installation plan and conduct routine maintenance training. Let customers save worry, trouble and money, and complete the project installation work faster and better.

Our team has cooperated with many government and private park projects. Our high-quality products and excellent services have won praise from customers. This is the feedback from one of the our government projects.

The equipment can be used in various scenarios, such as outdoor parks, shopping malls, indoors, etc. We can plan according to your site and make a 3D design drawing of the playground for you.






Error: Contact form not found.