Start with the age band, because everything else follows from it. A toddler zone lives or dies on how confidently a two-year-old moves through it without meeting a nine-year-old at speed. The 5IPG-13 is built for operators who want the youngest guests to have their own territory: kindergartens, family restaurants with a play corner, mall kids' areas and early-years centres. Published equipment guidance is over three years old, so pair it with your own supervision and gate rules for the one-to-four band.
Design the sightlines before the equipment. A parent seated at the edge should follow their child from the entrance mat to the far corner without standing up, which means keeping tall panels out of the middle of the room and grouping low pieces along the walls. Entry and exit should share one opening, narrow enough that a child cannot slip out unnoticed. Where a corner is awkward, use it for a quiet padded nook rather than a climber that blocks the view.
Toddler areas get wiped far more often than general play floors, so pick surfaces that survive it. Plastic parts are LLDPE imported from Korea, iron parts are galvanized steel pipes, and the mat is 2cm EVA, which copes with juice spills and daily mopping without the colour dulling. Ask how panels come apart when one section is scuffed, and how mats sit at doorways. Colour is customised, so a toddler zone can be finished in calmer tones than a general floor.
Count the adults, not just the children. Parent seating inside the room does more for repeat visits than any single piece of equipment: a bench along the wall, a low table, and a clear path to the door so a parent leaving with a tired child is not climbing over play pieces. Set your staff ratio against the shape of the room, not just the headcount, since a straight sightline covers more children. If your venue also runs a mall carousel such as the quiet mall carousel, place the toddler zone where a parent can watch both.
Finishing work is where a toddler zone starts to look like your venue. Colour is customised and logo printing is available, the set ships in export packing, minimum order is one set, and CE certification is supplied. Professional installation pictures and videos come with it for your in-house crew. If you plan a second feature for older siblings, a gentle coaster such as the wacky worm roller coaster sits well beside a toddler area.
|
Plastic parts |
LLDPE imported from Korea |
|
Iron parts |
galvanized steel pipes. |
|
Model Number |
YTCN-5IPG-13 |
|
Mat |
EVA.2cm thick. |
|
Packaging |
Export package |
|
Certificate |
CE Certificate |
|
Color |
Customized Color |
|
Suitable age |
Over 3 years old |
|
Installation |
professional installation pictures and videos |
|
Logo |
Customized Logo Availabled |
|
MOQ |
1 Set |
It is configured for the youngest guests, with low-level padded pieces and a layout that keeps a parent's sightline open across the room. Published equipment guidance is over three years old, so check your local rules for the one-to-four band and set gate checks to match them.
Kindergartens, early-years centres, family restaurants with a play corner, mall kids' areas and smaller family entertainment venues. The layout is built to order, so a room with columns, a low ceiling or an awkward corner can still be planned around rather than left half empty.
Plan seating for roughly one adult per child at peak, arranged along the walls so the centre of the room stays open. Bench height should let a seated adult see over the low padded pieces, and the path from bench to door matters as much as the benches.
Plastic parts are LLDPE imported from Korea, iron parts are galvanized steel pipes, and the safety mat is 2cm EVA. Those surfaces tolerate frequent wiping and the damp that arrives at doorways. Colour is customised, and logo printing is available.
Yes. Minimum order is one set, and the equipment ships in export packing. For a small room, plan fewer but larger padded modules rather than many small pieces, which keeps the floor open and leaves the room easier to clean at the end of the day.
It depends on the final layout, so we supply professional installation pictures and videos that walk your crew through the sequence step by step. Factory staff can be arranged instead. CE certification comes with the order, and colour and logo choices are settled before production.
01 Production
02 Shipping
03 Installation
04 Feedback
05 Application Scenario
We source premium to guarantee durability and longevity, Skilled craftsmen and advanced robotics work in harmony to precision-cut, weld, and assemble components, before shipping will do the testing. From raw materials to production to testing, we fully control the quality.
Use the professional export package, the fiberglass use the three layer(Bubble film + non-woven fabric + stretch film), it will better protect the equipment. The workers have rich loading experience, reasonable use of container space to save freight for customers.
We have the professional installation team. The engineer has rich experience with installation, can guide the installation, formulate a reasonable installation plan and conduct routine maintenance training. Let customers save worry, trouble and money, and complete the project installation work faster and better.
Our team has cooperated with many government and private park projects. Our high-quality products and excellent services have won praise from customers. This is the feedback from one of the our government projects.
The equipment can be used in various scenarios, such as outdoor parks, shopping malls, indoors, etc. We can plan according to your site and make a 3D design drawing of the playground for you.
Error: Contact form not found.
