






Every family park has the same gap: the older children queue for the big thrill rides while the younger ones stand at the fence. The 6P Candy Pendulum 5TR-05 is built for that moment. It hands a child their first pendulum swing in a candy-coloured cabin, so the little ones get a turn of their own instead of watching. Bright panels and a laser-printed graphic pull a parent over from across the walkway.
The swing angle is 40 degrees, and that figure is the reason the ride works in a kids area. There is enough travel to feel like a real swing, and not so much that a first-timer panics at the top. Riders share the cabin and swing together, so the experience is social rather than solitary. Six seats, rated 6P, means a small family can often ride in one go.
Handover is where staff earn their wage. The ride stands 4.3m tall, so a parent can follow the whole arc without craning over a fence. Attendants check the height rule at the gate with a simple measure, seat the group, then confirm the restraint on each position. Write the sequence on a card at the control desk so a relief operator follows the same steps at the weekend.
Cover area is 6.5 by 6.5 metres, about as small as a pendulum ride gets. That size is what lets a family park add a swing element without rebuilding a plaza. The ride is 4.3m tall and runs on 5KW, so the electrical work stays modest. Keep the pad level, leave the approach side clear for the queue, and put service access at the back.
Position this bay at the edge of the kids zone, where the bigger rides are still visible. Children ride the candy pendulum, look up, and start asking about the next step up. That progression grows thrill ridership without advertising spend: the candy swing is the first taste. Add a spaceship adventure ride beside it and the two pieces cover a wide age spread.
Suitable age is set at over 1.2m height, which is the practical cut-off for a swing cabin with a shared restraint. Measure at the gate, not at the seat. A marked board beside the entrance settles the argument before it starts and lets your attendant point at a rule.
The structure is FRP over steel, with logos and graphics applied by laser printing for a crisp finish that holds at the edges. Each unit carries a CE certificate and ships in an export package. Colour is custom, a custom logo is available, and installation is covered by professional pictures and videos or by our staff on site. Minimum order is 1 set.
School holidays test a kids ride harder than any other week. With six seats a turn, the candy pendulum absorbs a steady stream of small groups rather than one big wave, which suits a park where children arrive in twos and threes. Keep the queue inside a fenced lane so the walkway stays open, and rotate attendants at the gate so the height checks stay sharp. If you want a second small swing in the same zone, the portable miami ride sits comfortably beside it.
|
Product name |
6P Candy Pendulum |
|
Model Number |
YTCN-5TR-05 |
|
Capacity |
6P |
|
Height |
4.3m |
|
Power |
5KW |
|
Cover Area |
6.5*6.5m |
|
Swing angle |
40 degrees |
|
Logo/graphic design |
Laser Printing |
|
Packaging |
Export package |
|
Material |
FRP+steel |
|
Certificate |
CE Certificate |
|
Color |
Customized Color |
|
Suitable age |
Over 1.2m height |
|
Installation |
professional installation pictures and videos or arrange staff install |
|
Logo |
Customized Logo Available |
|
MOQ |
1 Set |
It widens the age range your kids zone can serve. Children who have outgrown toddler rides still want motion, and a swing gives them that without pushing them onto a full-size thrill machine. It also keeps families in the children's area longer.
The 40 degree angle is deliberately gentle for a pendulum ride. Motion is smooth and rhythmic rather than abrupt, the cabin is shared, and restraints are checked position by position before release. The 1.2m height rule matches a shared cabin restraint.
Suitable age is over 1.2m height. Put a marked measure at the entrance and check before the child reaches the seat, so nobody has to be turned away after boarding. Staff should treat the 1.2m line as a firm rule on every turn, including quiet weekdays.
Cover area is 6.5 by 6.5 metres and the ride stands 4.3m tall. The motor draws 5KW, which is a light connection for a small park. Keep the pad level and leave clear space at the front for the queue.
Colour is custom and a custom logo is available, so the candy styling can be reworked into another theme if your park has a different identity. Graphics and logos are applied by laser printing. Send artwork and a colour reference at order stage and production follows your brief.
Units ship in an export package with a CE certificate. Installation is supported with professional pictures and videos so your own crew can handle it, or we arrange for our staff to install on site. Minimum order is 1 set, so a single venue can trial the ride first.
01 Production
02 Shipping
03 Installation
04 Feedback
05 Application Scenario

We source premium to guarantee durability and longevity, Skilled craftsmen and advanced robotics work in harmony to precision-cut, weld, and assemble components, before shipping will do the testing. From raw materials to production to testing, we fully control the quality.

Use the professional export package, the fiberglass use the three layer(Bubble film + non-woven fabric + stretch film), it will better protect the equipment. The workers have rich loading experience, reasonable use of container space to save freight for customers.

We have the professional installation team. The engineer has rich experience with installation, can guide the installation, formulate a reasonable installation plan and conduct routine maintenance training. Let customers save worry, trouble and money, and complete the project installation work faster and better.

Our team has cooperated with many government and private park projects. Our high-quality products and excellent services have won praise from customers. This is the feedback from one of the our government projects.

The equipment can be used in various scenarios, such as outdoor parks, shopping malls, indoors, etc. We can plan according to your site and make a 3D design drawing of the playground for you.






Error: Contact form not found.