






The covered area is an 8m diameter circle, and that single number decides whether the 5TR-29 fits your site. On a small midway a circle is easier to place than a rectangle: it slots into the end of a ride row or a lawn corner.
Leave a clear band outside the circle for the queue, the operator position and an emergency route. Level, drained ground with the foundation built to the supplied drawings is the only real site requirement. Where a compact plot already carries a water attraction, operators often set a shark island beside it, since both work in the same tight footprint.
Twelve seats per cycle sets your planning figure. With a short load, a restraint check and a ride of roughly two minutes, a well-run unit turns over 14 to 16 cycles an hour - around 170 to 190 rides. That is real capacity from a patch of ground a tennis court would cover.
The boarding gate holds that number up or drags it down. Put one attendant on the gate and one on the control panel, load both rows at once, and the cycle stays close to plan.
Power is 8KW, light for a ride that produces a genuine drop sensation. On a mid-size midway that keeps the electricity line small in the annual budget and suits a site where the supply was sized for smaller equipment. Confirm the supply and the drive arrangement before ordering.
Two attendants run it comfortably, three on a holiday peak. For a first thrill ride the case rests on ticket price against modest running cost. Operators building a compact thrill zone often add a 36P shaking head flying chair nearby.
Height is 4.3m, which is why this ride works as an entry point. It feels like a thrill ride without the site, foundation and capital cost of a large pendulum, so a growing venue can test thrill demand first. Price a single ride and a multi-ride band, and place the band price at the queue.
The ride suits visitors over three years old, with height and supervision rules applied as standard. FRP and steel construction and customized colour keep the unit recognisable, and the CE Certificate covers it as supplied.
|
Product name |
12P Pendulum |
|
Model Number |
YTCN-5TR-29 |
|
Capacity |
12P |
|
Height |
4.3m |
|
Power |
8KW |
|
Cover Area |
8m diameter |
|
Packaging |
Export package |
|
Material |
FRP+steel |
|
Certificate |
CE Certificate |
|
Color |
Customized Color |
|
Suitable age |
Over 3 years old |
|
Installation |
professional installation pictures and videos or arrange staff install |
|
MOQ |
1 Set |
At 4.3m and 12 seats it delivers a real pendulum drop without the ground, foundation and capital cost of a large unit. For a small park testing thrill demand, that keeps the risk low while giving guests something different from a spinning ride.
The covered area is an 8m diameter circle, with the foundation built to the supplied drawings on level, drained ground. Allow extra space outside the circle for the queue, the operator position and a clear emergency route, and check gate widths for access.
Twelve riders per cycle at roughly 14 to 16 cycles an hour, so about 170 to 190 rides. Two attendants on the gate and the panel keep it near the top of that range, and loading both rows together is what protects the cycle time.
The ride draws 8KW. That is modest for a thrill unit and usually fits an existing midway supply without major upgrade work. The drive arrangement is confirmed against your supply before the order is built, so have your electrical contractor check the site first.
Visitors over three years old, with height and supervision rules applied on site as standard practice. The unit is CE certified, colour is customized to your venue, and the minimum order is one set. Pairs usually ride together, so keep the queue rail wide.
Professional installation pictures and videos are provided, and our staff can be arranged to attend. Check gate widths and lifting access before delivery day, and confirm the ground is level and drained so the foundation work is not delayed on arrival.
01 Production
02 Shipping
03 Installation
04 Feedback
05 Application Scenario

We source premium to guarantee durability and longevity, Skilled craftsmen and advanced robotics work in harmony to precision-cut, weld, and assemble components, before shipping will do the testing. From raw materials to production to testing, we fully control the quality.

Use the professional export package, the fiberglass use the three layer(Bubble film + non-woven fabric + stretch film), it will better protect the equipment. The workers have rich loading experience, reasonable use of container space to save freight for customers.

We have the professional installation team. The engineer has rich experience with installation, can guide the installation, formulate a reasonable installation plan and conduct routine maintenance training. Let customers save worry, trouble and money, and complete the project installation work faster and better.

Our team has cooperated with many government and private park projects. Our high-quality products and excellent services have won praise from customers. This is the feedback from one of the our government projects.

The equipment can be used in various scenarios, such as outdoor parks, shopping malls, indoors, etc. We can plan according to your site and make a 3D design drawing of the playground for you.






Error: Contact form not found.