An adventure-themed play floor fails when everything is the same difficulty. Children work out within a minute which parts they can already do, and the interesting ones are the parts they cannot do yet. The 5IPG-05 is laid out with that in mind: a route that starts low at the entrance and gains height and complexity as it moves through the room, so a child can pick a level and move up when they are ready.
The structure uses LLDPE plastic parts imported from Korea and galvanized steel pipes throughout, and it is the arrangement of the features rather than the parts that creates the challenge. Colour and logo are customizable, which matters more here than on a plain play structure because colour carries the route: blocks of colour read as stages.
Three bands cover almost every indoor site. The entry band is low climbing, soft ramps and short tunnels, sized for a three-year-old who wants to move without help. The middle band adds height, balance beams and a crawl-through that needs a decision at the top. The upper band is the one that pulls older children back to the venue rather than sending them to a screen.
Suitable age is over 3 years old on the whole unit. Where a site is mostly toddler traffic, the upper band is drawn shorter; where it sits in a mall with nine and ten year olds in the building, the route is extended. The floor mat is EVA at 2cm, which holds shape under a busy route without becoming a trip hazard at the edges.
Adventure play only works if parents can see it. Height and tunnels make the route fun, and they also block a clear view. The practical fix is to run the difficult section along a wall rather than through the middle of the floor, keep the vertical features against the perimeter, and leave the centre open.
Staff get the same benefit. One person at the entrance can watch the entry band, the middle band and the exit in a single sweep, which is what makes a ratio of one supervisor to a busy floor realistic. Sites that also run outdoor rides often put a mini shuttle train on a fixed loop so the outdoor queue does not pull staff away from the play floor, or a double-sided Ferris wheel ride as a second paid attraction.
A fixed adventure floor has a problem: the children who first used it grow up. Leave a spare section of floor at one end of the room, run the power and the fixings so a module can be added, and keep the layout drawing updated as the route changes.
The unit ships in export package and assembles from professional installation pictures and videos, and the minimum order is one set, so an extension is a second purchase. Venues that started with a public floor and later added private hire commonly run a birthday party soft play area alongside it.
|
Plastic parts |
LLDPE imported from Korea |
|
Iron parts |
galvanized steel pipes. |
|
Model Number |
YTCN-5IPG-05 |
|
Mat |
EVA.2cm thick. |
|
Packaging |
Export package |
|
Certificate |
CE Certificate |
|
Color |
Customized Color |
|
Suitable age |
Over 3 years old |
|
Installation |
professional installation pictures and videos |
|
Logo |
Customized Logo Availabled |
|
MOQ |
1 Set |
By the age mix you actually serve, not the mix you hope for. Count a normal Saturday's children, then draw the entry band for the youngest regular group and the upper band for the oldest. The layout is a custom design, so the split is set at the drawing stage.
The unit is intended for children over 3 years old, and the entry band is built for that age with low features and soft ramps. Younger children should be accompanied on the equipment rather than left to use it alone, and the padded mat under the route softens any fall.
Route design. A single direction through the features, a wide exit and the difficult sections against the wall mean one supervisor can see most of the floor at once. The EVA mat at 2cm keeps the walking routes stable under constant traffic.
The layout is custom, so the room size sets the route rather than the reverse. Send the floor dimensions, door positions and ceiling height, and the drawing that comes back will show the route fitted to your room before you commit to an order.
Plastic parts are LLDPE imported from Korea and iron parts are galvanized steel pipes, with the EVA floor mat at 2cm. A CE certificate is issued with the order, and the same material list is supplied in writing for your own records.
Colour and logo are customizable, so the route can be re-coloured without replacing the structure. A customized logo is available on the unit, which lets a shopping centre, a council or a brand partner appear on the play floor at no cost to the ride layout.
01 Production
02 Shipping
03 Installation
04 Feedback
05 Application Scenario
We source premium to guarantee durability and longevity, Skilled craftsmen and advanced robotics work in harmony to precision-cut, weld, and assemble components, before shipping will do the testing. From raw materials to production to testing, we fully control the quality.
Use the professional export package, the fiberglass use the three layer(Bubble film + non-woven fabric + stretch film), it will better protect the equipment. The workers have rich loading experience, reasonable use of container space to save freight for customers.
We have the professional installation team. The engineer has rich experience with installation, can guide the installation, formulate a reasonable installation plan and conduct routine maintenance training. Let customers save worry, trouble and money, and complete the project installation work faster and better.
Our team has cooperated with many government and private park projects. Our high-quality products and excellent services have won praise from customers. This is the feedback from one of the our government projects.
The equipment can be used in various scenarios, such as outdoor parks, shopping malls, indoors, etc. We can plan according to your site and make a 3D design drawing of the playground for you.
Error: Contact form not found.
