






The Rainbow Slide YTCN-5NP-01 is the long, wide, multi-band slide you spot from the far side of a park. Riders travel down parallel colour strips side by side, which turns a plain descent into something groups want to repeat. Gravity does all the work, so there is nothing to switch on in the morning.
Width decides how many people descend at once and how the structure reads from the entrance. The range runs 1.76m, 2m, 2.2m, 2.4m and 2.65m, and figures in between are built to order. A narrow run suits a schoolyard or a compact community park where space between existing equipment is tight.
Wider builds belong in destination parks, where families arrive in groups and the busiest hour decides how the day feels.
Length sets the ride rather than the look. A 50m run is quick and repeatable, which suits younger children and sites where parents want to watch from one place. At 100m the slide becomes a genuine feature. The 150m version reads as a hillside attraction and pulls visitors across the whole site.
Longer runs need more ground, so the geometry is confirmed against your land before production.
The run-out at the bottom matters as much as the slide itself. Riders arrive with speed, so the exit needs a flat, unobstructed stretch and a surface that sheds water well. On sloping ground, check drainage above the slide first. Water travelling under a structure causes more long-term trouble than rain falling on it.
Sites that add a climbing element nearby often install a net climbing volcano for active children, which gives waiting children somewhere to burn energy.
Colours are customized, and the band sequence is part of the design work. Bright primaries read well against grass and fade less noticeably over years outdoors. Coastal sites sometimes choose blues and whites. Covered or indoor venues can carry deeper tones that would look heavy in open sunlight.
A second slide in a different palette at the opposite end of a large park spreads foot traffic. A shorter wet crossing play element for shallow water works well halfway between the two.
Several bands mean several descents at once, so the climb back to the top usually limits flow. Keep the return path wide, avoid a single narrow stair, and leave room at the top for children to wait without blocking the entry. A supervisor should see the whole run from one position.
Components arrive in export packaging, grouped by section and marked for assembly. On site the work is alignment and fixing: set the base, place the support frames, join the run in order, then check the transitions by hand before opening. A small crew can finish a standard build, and a panoramic viewing tower for the park edge can be added later if you want a second draw.
|
Product name |
Rainbow Slide |
|
Model Number |
YTCN-5NP-01 |
|
Width |
1.76m/2m/2.2m/2.4m/2.65m/Customize |
|
Length |
50m/100m/150m/Customize |
|
Size |
customized |
|
Packaging |
Export package |
|
Color |
Customized Color |
|
Suitable age |
Over 3 years old |
|
MOQ |
1 Set |
It depends on the width you order and how many bands are specified. We confirm the arrangement with you during design so it matches the traffic you expect.
Yes. Many operators run it dry for most of the year and add water during summer. The surface handles both without a change of components.
It varies with the length and profile you choose. We review your terrain before quoting so the delivered geometry suits what you have.
A standard run is a matter of days for a small crew once the base is ready. Longer builds need more time for frame alignment and joint checking.
Yes. It carries CE certification, and the documentation ships with the order so it can be handed to local authorities during permitting.
Visual checks on joints and surfaces, plus cleaning of the run. Water-fed versions need the feed checked before each season, and fixings tightened if a joint has worked loose.
01 Production
02 Shipping
03 Installation
04 Feedback
05 Application Scenario











Error: Contact form not found.