






The Bungee Trampoline YTCN-5BT-04 holds four riders at the same time, and that one number shapes the whole operation. Four ropes, four harness sets, one tower. On a busy Saturday in a mall atrium the crew works the stations in a fixed order, left to right, so nobody loses track of who is clipped in. Load, check, count, launch, land, unclip, repeat.
The 6.5m height is why people queue twice. A jumper gets a long stretch at the top before the elastic takes over, and the ride down lasts long enough for a phone camera to catch it.
Every rider is clipped in by staff, never by a parent. The buckle sits low and tight across the hips, the rope setting matches the rider's weight, and the operator calls the count out loud. Half a minute per check sounds slow until you watch forty children move through in an afternoon.
Four people cover it: two on harnesses, one at the tower, one at the till and waiver desk. New staff learn the sequence in a single shift, which matters when you open a second site.
The ride draws 4kW, the kind of load a standard commercial supply handles without a generator. Including the landing mats and the queue rail it takes up 9x9m, so a mall atrium corner, a resort lawn or a narrow retail unit can all take it. Padded surrounds keep watching parents off the mat.
Venues that also run inflatables often pair this with a vivid inflatable slide in the same family zone, so one queue feeds the other.
Units leave in export packaging with the FRP and steel parts separated. Assembly follows the professional installation pictures and videos we send with the container.
Most crews finish a unit in a day and a half.
Custom colours and custom logos are both available, so a venue can run its own palette on the tower panels. Minimum order is one set, which suits operators testing the ride before rolling it out.
Four-minute sessions with a two-minute changeover are the usual pattern, which lands near forty rides an hour at full load. Peak blocks run after school and on weekend afternoons; weekday mornings are quiet, so some operators rent the ride out to schools and holiday programmes instead.
CE certification on the harness system makes those conversations easier with insurers. If you want a second attraction the same crew can sell, the Christmas tree ride uses a similar power supply and spectator footprint.
|
Product name |
Bungee Trampoline |
|
Model Number |
YTCN-5BT-04 |
|
Capacity |
4P |
|
Height |
6.5m |
|
Power: |
4KW |
|
Cover Area: |
9*9m |
|
Packaging: |
Export package |
|
Material |
FRP+steel |
|
Certificate |
CE Certificate |
|
Color |
Customized Color |
|
Suitable age |
Over 3 years old |
|
Installation |
professional installation pictures and videos |
|
Logo |
Customized Logo Availabled |
|
MOQ |
1 Set |
Four riders per cycle at roughly six minutes per cycle lands near forty an hour. Quick harness work and a helper at the loading rail push it higher. Your real ceiling is queue management, not the machine, so set a visible session clock and the line looks after itself.
The tower is 6.5m. Rise depends on body weight and the rope setting, which the operator adjusts before each launch. Lighter children get a softer setting so the bounce stays comfortable rather than floaty. We mark the settings on the ropes so any operator repeats them.
It draws 4kW. A normal commercial circuit copes in most venues, though older buildings should have an electrician confirm the feed before installation day. The power details travel with the installation pack, and if your building already runs heavier equipment elsewhere, tell us and we will match the unit to it.
Plan for 9x9m. That covers the ride, the landing mats and a queue lane. Spectator viewing sits outside that square, which helps when the ride stands in a mall walkway. Leave a little extra beyond the barrier so people walking past do not clip the queue rail.
Yes. Custom colours and custom logos are both available, and one set is the minimum order, so a single site can trial the ride before you commit to more. Operators often match the tower to their existing signage so the ride looks built in.
It is manageable. We supply professional installation pictures and videos covering the tower, base and rope setup. Most crews assemble a unit in a day and a half and handle routine maintenance after that without help. Nothing on the ride needs a specialist contractor.
01 Production
02 Shipping
03 Installation
04 Feedback
05 Application Scenario

We source premium to guarantee durability and longevity, Skilled craftsmen and advanced robotics work in harmony to precision-cut, weld, and assemble components, before shipping will do the testing. From raw materials to production to testing, we fully control the quality.

Use the professional export package, the fiberglass use the three layer(Bubble film + non-woven fabric + stretch film), it will better protect the equipment. The workers have rich loading experience, reasonable use of container space to save freight for customers.

We have the professional installation team. The engineer has rich experience with installation, can guide the installation, formulate a reasonable installation plan and conduct routine maintenance training. Let customers save worry, trouble and money, and complete the project installation work faster and better.

Our team has cooperated with many government and private park projects. Our high-quality products and excellent services have won praise from customers. This is the feedback from one of the our government projects.

The equipment can be used in various scenarios, such as outdoor parks, shopping malls, indoors, etc. We can plan according to your site and make a 3D design drawing of the playground for you.






Error: Contact form not found.