Flying Ufo Disk O Ride

At a UFO Disk Bay Where the Nine Metre Track Has to Fit

The Flying UFO (Disk'O) Ride 5TR-06 is built around a curved track that stands 9m high, and the disk runs along that track while it turns. This is not a flat spin machine you drop onto any free patch of concrete. Plan the bay so the track structure has clearance above it and the disk has room to swing at both ends.

On a Twenty-Four Seat UFO Disk Through the Swing and Spin

Capacity is 24P, seated around the edge of the disk. The motion mixes three things: a swing along the track, a tilt at each end of the run, and a steady rotation. Riders get the view from the top of the arc and the rush of the return inside the same cycle. Because the movement is smooth rather than violent, the UFO keeps drawing riders who would never board a free-fall tower.

Beside the UFO Disk Platform at Load and Unload

A disk ride loads fast when the platform edges stay clean. Attendants walk the ring, check each position, then step back before release. With 24 seats, a whole group can be seated in one pass of the loading sequence, which is why the UFO holds a queue so well at the weekend. Fence the platform edge and mark the attendant path.

Along an Eight by Thirty Metre UFO Disk Footprint

Cover area is 8 by 30 metres, so this is a long bay rather than a bulky one. Measure the site first: the ride wants a straight run with clearance at both ends for the swing and queue. On a narrow strip of land that shape can be easier to place than a round ride of similar capacity. Keep service access along one side of the track.

At a UFO Disk Gliding at Thirty-Six Kilometres per Hour

Gliding speed is 36km/h, quick enough to feel like a coaster and controlled enough to keep the disk on its track. The sensation comes from speed combined with tilt rather than from height alone: 9m of track height and a 6.5m swing diameter give a compact but eventful circuit. Show the ride from the walkway and the queue looks after itself.

Under the UFO Disk Body: FRP, Steel and a 50KW Drive

Panels are FRP over steel and the drive is 50KW, so confirm your supply and panel capacity with an electrician before ordering. Laser printing handles logos and graphics, colour is custom, and units ship in an export package with a CE certificate. Installation support comes as professional pictures and videos or as staff on site, and the minimum order is 1 set. To balance the zone with something slower, look at the mid size sightseeing bus or the whale sightseeing bus for a themed touring route.

Technical Specifications