






A water attraction does not need a field. The Water Park Playground 5WPP-11 is drawn for plots that other suppliers turn down: the strip behind a shopping arcade, the corner of a car park that is never used, the yard between two buildings. Size is customized, and that includes awkward shapes as well as small ones.
The practical way to test a plot is to send us a sketch with the walls, doors and drainage points on it. We draw the play loop inside those lines and tell you honestly what fits, what has to move and what cannot be done.
Indoor and rooftop sites add three constraints that open ground does not have: load, headroom and water containment. The frame is 116mm diameter galvanized steel pipe with engineering plastic play parts, which keeps dead load and water weight manageable, but your structural engineer still signs off on the slab.
Headroom drives the layout more than floor area. A low atrium favours sprays and pad play; a tall one allows slides. We supply foundation loads and posts positions early so the calculation happens before drawings are frozen.
Compressing a layout has a limit, and it is not the structure. It is the walking space between features. Once paths get too narrow, children collide and parents stop coming back. We protect a minimum circulation width and cut module count instead, which sounds like less value but keeps the zone usable.
The features that survive compression best are sprays, ground jets and short slides. Long sightlines and open pads are the first to go.
An urban plot has neighbours. Three items usually come up in planning conversations.
We position pumps away from shared walls, size deck falls so water leaves quickly, and give your contractor mounting points for shields if a boundary is close. Small venues often pair the water zone with a fairground piece; our portable carousel for events and festivals is built for exactly this kind of shared space.
Small sites often have small access. Packing is export package, and we can label and sequence loads so the longest pipe sections arrive together and go in first. Where a crane cannot reach, the crew lifts by hand through a door or over a wall, which is planned at drawing stage rather than discovered on site.
Installation support is supplied as professional installation pictures and videos. Certification is CE, age guidance is over 3 years old, MOQ is 1 Set, and the price covers the playground only without small items. A second dry attraction such as an ocean train can share the container when both are ordered together.
|
Production Name |
Water Park Playground |
|
Model Number |
YTCN-5WPP-11 |
|
Size |
Customized size |
|
Material |
116mm diameter galvanized steel pipe engineering plastic,Price only for playground, do not include small items |
|
Packaging |
Export package |
|
Certificate |
CE Certificate |
|
Installation |
professional installation pictures and videos |
|
Logo |
Customized Logo Availabled |
|
Applicable age |
over 3 years old |
|
MOQ |
1 Set |
It depends on the shape and the access more than the area. Send a sketch with walls, doors and drains marked and we will test a layout on it. Where a plot is very tight, we cut module count to protect walking space instead of squeezing features together.
Yes, when the slab can carry the structure and water load and your structural engineer confirms it. We provide post positions and foundation loads early. Containment and drainage on an elevated slab need more attention than on open ground, so plan those before ordering.
Fewer modules, not less play value. Sprays, ground jets and short slides compress well, and a tight loop keeps children moving between them. What we will not do is narrow the walking routes, because crowding is what makes small venues feel crowded.
Every slide needs a waiting lane and a separate exit line. On small sites those two paths are often the largest single use of floor space after the deck itself. We mark both on the drawing so you can see the real footprint before production.
The deck tilts toward collection points that connect to your existing drain, with capacity for a heavy storm rather than average flow. Standing water is designed out. Your contractor prepares the base and connection; we supply the deck drawing and outlet positions.
MOQ is 1 Set and packing is export package, so one unit can ship on its own. Loads are labelled to match the assembly sequence. If a crane cannot reach the site, tell us before packing so sections are sized for hand lifting.
01 Production
02 Shipping
03 Installation
04 Feedback
05 Application Scenario

We source premium to guarantee durability and longevity, Skilled craftsmen and advanced robotics work in harmony to precision-cut, weld, and assemble components, before shipping will do the testing. From raw materials to production to testing, we fully control the quality.

Use the professional export package, the fiberglass use the three layer(Bubble film + non-woven fabric + stretch film), it will better protect the equipment. The workers have rich loading experience, reasonable use of container space to save freight for customers.

We have the professional installation team. The engineer has rich experience with installation, can guide the installation, formulate a reasonable installation plan and conduct routine maintenance training. Let customers save worry, trouble and money, and complete the project installation work faster and better.

Our team has cooperated with many government and private park projects. Our high-quality products and excellent services have won praise from customers. This is the feedback from one of the our government projects.

The equipment can be used in various scenarios, such as outdoor parks, shopping malls, indoors, etc. We can plan according to your site and make a 3D design drawing of the playground for you.






Error: Contact form not found.