Big Slope Trampoline Park

Big Slope Trampoline Park
Big Slope Trampoline Park
Big Slope Trampoline Park
Big Slope Trampoline Park
Big Slope Trampoline Park
Big Slope Trampoline Park
Big Slope Trampoline Park

Technical parameters

Slope Structure First: What the 5BT-17 Asks of Your Building

A slope wall is the reason to buy the Big Slope Trampoline Park YTCN-5BT-17, and it is also the part that shapes your floor plan. The incline needs run-up mat in front of it and clear landing space behind, which together take more room than the same area laid flat.

So the honest first question is not how many jumpers the park holds. It is ceiling height at the point where you want the slope. Send us your heights and we will answer that before you commit to anything.

Ceiling Height and Columns: The 5BT-17 Site Checklist

  • Clear headroom above the slope's highest point, measured at the actual column line you plan to build on.
  • A level floor across the whole park footprint, since the frame sits on it rather than being bolted down.
  • Support columns marked on your drawing, so zones are drawn around them instead of into them.
  • Unloading access wide enough for the crates, plus space to stage parts during assembly.
  • A power feed for lighting, and a service walkway that staff can patrol without stepping on mats.

Drawing a 5BT-17 Around What You Have

Size is customized and the design is free. Give us a plan with ceiling heights, door positions and columns marked, and we return a layout showing where the slope sits, how the flat zones wrap around it, and how the walkway reaches both ends of the hall.

Warehouse conversions usually have one low section near the loading doors and full height in the middle. That pattern suits a slope park well: the incline goes where the roof is high, and the quieter children's zone sits under the low bay.

Built to Stay Level: Mats, Frames and Springs on 5BT-17

Jumping mat
PP material imported from the United States, with a border we can print onto the surface.
Frame and tubes
Galvanized steel inside and outside, so damp air does not start corrosion where inspection cannot reach.
Springs
Super high-strength chrome plated springs with strong elastic performance, replaced individually.
Body panels
FRP and steel in your chosen colour, with logo panels available.

Slope Wall Coaching: Getting 5BT-17 Riders Up to Speed

First-timers need two minutes of instruction: feet together, no forward flips on the first attempt, hands free on landing. After that the wall looks after itself, and the marshal can watch the whole run from one position.

Put the rules at the wall rather than the entrance. That is where people read them, and it keeps the queue moving.

Staffing and Zones on a 5BT-17

Suitable age starts over three years. Plan a bounded zone for the youngest jumpers, positioned away from the slope run-up so a small child never wanders into a landing area. Two marshals per live zone at peak, one at the desk, one floating, is a workable pattern for a park this size.

Weekday mornings are your quiet hours. That is when school groups book, and it is the main reason a large slope park carries its costs before the weekend arrives.

Beyond the Park: Rides That Fill the Same Building

Large venues rarely stop at trampolines. A dinosaur bike ride gives younger siblings something to do at ground level, and a large sightseeing bus works as a slow, easy attraction for the entrance area where guests arrive and leave.

Installation for the park runs off professional pictures and videos shipped with the container, and minimum order is one set.

Technical Specifications

Product name

Big Slope Trampoline Park

Model Number

YTCN-5BT-17

Jumping Mat

PP material,Imported from United States, can make border on it

Frame/Tubes

Galvanized steel inside and outside

Springs

Super high-strength Chrome plated, of good elastic performance

Size

Customized and provide free design according to your place

Packaging:

Export package

Material

FRP+steel

Certificate

 CE Certificate

Color

 Customized Color

Suitable age

 Over 3 years old

Installation

 professional installation pictures and videos

Logo

 Customized Logo Availabled

MOQ

 1 Set

Frequently Asked Questions

How much headroom does a YTCN-5BT-17 slope park need?

It depends where the slope sits, because the incline is the tallest part. Send your ceiling heights with the column positions marked and we will confirm before ordering. Do not guess this one — measure at the point you plan to build.

Does the frame need to be bolted to the floor?

The park sits on a flat, level surface. What matters most on site is floor flatness across the full footprint, since an uneven slab makes mat runs feel inconsistent. Your installer will check levels before fixing panels, so allow a day for that on site.

Can the park be split across two rooms?

No. A slope park works as one continuous field, because riders need run-up and landing space in a straight line. If your building has two separate halls, plan two attractions rather than one divided park, and run the plan past your site engineer first.

What size is the YTCN-5BT-17?

Size is customized and the design is free. There is no single figure, because every venue is different. Send a floor plan and we will return a layout matched to your columns, ceiling heights and access doors. Free design means you see the layout before ordering.

How do we handle busy weekends?

Use timed sessions with a short changeover, and marshal the slope separately from the flat zones. Rolling entry for general jumpers and booked slots for the slope keeps the wall from becoming a single long queue. Post the session times where the queue forms.

What support do we get after installation?

Installation pictures and videos ship with the container, and we stay available while your crew assembles. Springs and mats are the parts that wear, and both can be ordered as spares with a later shipment. Tell us which parts you want held back for you.

Project process

  • 01 Production

  • 02 Shipping

  • 03 Installation

  • 04 Feedback

  • 05 Application Scenario

Production
01 Production

We source premium to guarantee durability and longevity, Skilled craftsmen and advanced robotics work in harmony to precision-cut, weld, and assemble components, before shipping will do the testing. From raw materials to production to testing, we fully control the quality.

Shipping
02 Shipping

Use the professional export package, the fiberglass use the three layer(Bubble film + non-woven fabric + stretch film), it will better protect the equipment. The workers have rich loading experience, reasonable use of container space to save freight for customers.

Installation
03 Installation

We have the professional installation team. The engineer has rich experience with installation, can guide the installation, formulate a reasonable installation plan and conduct routine maintenance training. Let customers save worry, trouble and money, and complete the project installation work faster and better.

Feedback
04 Feedback

Our team has cooperated with many government and private park projects. Our high-quality products and excellent services have won praise from customers. This is the feedback from one of the our government projects.

Application Scenario
05 Application Scenario

The equipment can be used in various scenarios, such as outdoor parks, shopping malls, indoors, etc. We can plan according to your site and make a 3D design drawing of the playground for you.

Customer Reviews

Customer Feedback
Customer Feedback 2

Company Strength

Yueton Company Strength
Yueton Company Strength 2
Yueton Company Strength 3
Yueton Factory

Contact Us

Error: Contact form not found.

Home WhatsApp Mail Inquiry